Email:
Tel:
Online Consultation
High-efficiency thickener
【Introduction】: Introduced a new mechanical structure thickener produced by American technology.
【 Capacity 】: 5-1400t/d
【Improvement】: The new mechanical structure strengthens the flocculation effect of the flocculant on the solid particles, and can additionally provide a flocculant addition system.
Online Consultation
Advantages
- Adding flocculant increases the particle size of the settled solid particles, thereby accelerating the settlement speed.
- Increase the degassing tank to prevent solid particles from adhering to the bubbles.
- There is a receiving tray to move the ore tube down to make the feed slurry fall evenly and smoothly, effectively preventing the occurrence of flower flipping.
- The unit processing capacity is 4-9 times that of the conventional concentrator. According to the unit processing capacity, it can save 30% energy consumption than the traditional concentrator.
- It can additionally provide flocculant addition system, flocculant addition automatic control system and high-efficiency thickener automatic control system.
Product Case
In the concentration process of a beneficiation plant, it is necessary to additionally equip a pharmaceutical system, which increases the cost and also increases the consumption. The high-efficiency thickener can provide a flocculant and other agent addition system, and the supporting role between the facilities is more obvious. In addition, the new mechanical structure increases the flocculation effect of the flocculant on the solid particles. While being convenient and efficient, the cost is controlled to a certain extent.
Product Structure
The working principle of the high-efficiency thickener: before the slurry enters the high-efficiency thickener, after removing most of the gas contained in the degassing device, it enters the mixing device from the feed pipe, and the slurry is fully mixed with the appropriate amount of flocculant in the mixing device to form Good flocculation state, then diffuse from the bottom to the surrounding into the pre-formed high-concentration sediment layer at the bottom of the concentration tank. At this time, the flocculated slurry (flock) settles to the bottom of the tank; the slurry water rises through the sediment layer. Here, the sediment layer plays a filtering role, preventing fine-grained slime from rising. The slurry that has not been fully flocculated will continue to be in contact with the floc mass when it reaches the sediment layer, so that the floc will continue to grow. Finally, the rake rack is driven by the center drive device to push the concentrated material to the center discharge port for discharge, and the slurry water flows out from the overflow port.
Technical Parameters
| Model | Inner Diameter of Tank (mm) | Tank Height (mm) | Subsidence Area (m2) | Rabble Rotating Speed (r/min) | Lifting Height of the Rabble (mm) | Driving Motor Model | Driving Motor Power (kW) | Lifting Motor Model | Lifting Motor Power (kW) | Steel Tank Weight (kg) | Weight (kg) |
| GX-3.6 | 3600 | 1700 | 10.2 | 1.1 | 200 | Y100L-6 | 1.5 | Y100L-6 | 1.5 | 2829 | 6650 |
| GX-5.18 | 5182 | 2134 | 21 | 0.4 | 300 | Y132S-6 | 3 | PZ0.8AB | 0.8 | 5342 | 10460 |
| GX-6 | 6000 | 2500 | 28.3 | 0.8 | 300 | Y132M1-6 | 4 | Y132S-8 | 2.2 | 6506 | 10573 |
| GX-7.5 | 7500 | 2800 | 44.1 | 0.427 | 300 | Y132M2-6 | 5.5 | Y132S-8 | 2.2 | 10258 | 17320 |
| GX-9 | 9000 | 2800 | 63.6 | 0.427 | 300 | Y132M2-6 | 5.5 | Y132S-8 | 2.2 | 15980 | 23680 |
| GX-12 | 12000 | 3600 | 110 | 0.35 | 300 | Y132M-4 | 7.5 | Y100L1-4 | 2.2 | 25589 | 42756 |
| GX-15 | 15000 | 4000 | 177 | 0.15 | 300 | YCT200-4B | 7.5 | Y112M-6 | 2.2 | 36050 | 59000 |
| GX-18 | 18000 | 4400 | 254 | 0.13 | 400 | YCT200-4B | 7.5 | YTC752A-44 | 5.5 | 52485 | 73296 |
| GX-20 | 20000 | 4400 | 314 | 0.13 | 400 | YCT200-4B | 7.5 | YTC752A-44 | 5.5 | 59365 | 76020 |
